To return to PLAY from FF or RW press PLAY again. Both RW and FF have a delay to start working about 2 seconds. You can also FF and RW in time shift mode.
Press INFO button to remove the info bar at bottom. How to Timeshift with CaptiveWorks CW-800S – Instructions and Featuresġ.) TO Time shift press PAUSE button and give it a few seconds to get ahead of real time then press PLAY when you want to watch. Select Captive Works then CW800 then File only latest update should be the first line of the Sticky section click on this line and it will open another page were the update will be in blue like ex: CW800SV1.xx_yyyy_mm_dd.bin download the new update then open the zip file copy the file inside like ex: CW800SV1.26_2007_10_26.bin and paste to your USB key to update the receiver go to How to use feature: 7.) below.ģ.Increased the size of the display when inputting channel numbers.Ħ.USB menu can do (Stream, Movies, Music, Pictures, Software and others) Ĩ) Then click Start, and the upgrade will begin.ĩ) After finishing, the LED will display “-End”
SDX file, EX: “CaptiveWorks_CXDatabaseV1.00_1.sdx”. Ĥd- Then click Start, and the upgrade will begin.ĥ) After finishing, the LED will display “-End”Ħ) To update the channel list it’s the same step except select Download Dataħ) Press Open (the Yellow file icon) and select the. Note: Loader will not work until you see – – : – – on the LED panelĤ) Run the “CW800SUpgradeV1.02.exe” (or current loader) on your PC.Ĥa- Select the right COM port where you connected your NULL modem cable usually COM1.Ĥc- Press Open (the Yellow file icon) and select the bin file, EX: “CW800SV1.xx_yyyy_mm_dd.bin”. 1) Connect your PC and receiver with the Cable (Serial Null Modem) that came with your Receiver.Ģ) Plug the Receiver into a power outlet.ģ) Turn the receiver ON from the switch on the back of the receiver and you will see 00:00 and then press the “POWER OFF” key on front of the receiver panel to make it standby, the LED dot – – : – – will blink.
0 kommentar(er)
